BSCI驗廠關于電線外露所采取的措施?
問題現象: 電線外露.
解決措施: 外露的電線增加絕緣措施.
BSCI條款:
B.11.4 Electricity
電力
a) Are electrical installations checked periodically?
a) 是否定期檢查電力裝置?
b) Are blank electrical contacts exposed?
b) 不在使用的電力接觸是否外露?
c) Are electrical installations properly fixed so that they cannot easily fall down?
c) 電力裝置是否安裝妥當，以致不會很容易掉下來?
d) Are electrical cords correctly fixed or repaired with tape?
d) 電線是否妥當地安裝或用膠布修補?
e) Are encasements of electrical machinery, devices and attachments broken?
e) 存放電動機器、用具和附件的箱子是否破爛?
f) Is there a danger that electrical installation will energize surrounding installation (e.g. fragile electrical cords close to metal)?
f) 電力裝置會否對四周的裝置構成危險(例如容易破損的電線與金屬物距離很近)?
g) Are high voltage signs properly installed where needed (e.g. main power point, main fuse box)?
g) 當有需要的時候，是否妥當地安裝好高電壓(例如主要電源插座、主要保險絲盒)的標志?
h) Are workplaces obstructed by distribution lines (e.g. electrical cords lying on the floor causing employees to
trip over them, electrical cords on tables, poorly installed electrical cords creating a risk of strangulation)?
h) 工作場所是否被分送線路阻礙(例如地面上的電線可能令員工絆倒，桌面上的電線，安裝差劣的電線可能構成勒死的危險)?
i) Are power hubs, electrical control stations, fuse boxes lockable?
i) 電線插孔、電力控制站和保險絲盒子是否可以上鎖?
j) Are the boxes made out of non flammable material?
j) 這些盒子是否用非易燃物料制成?
k) Are light fittings, switches, plugs etc. in good condition, not broken and don’t cause danger (electrocution)
to employees (missing cover for switches and plugs)?
k) 燈光設備、開關掣和插座的狀況是否良好，沒有損毀，也不會(因為電掣和插座失去覆蓋)構成(如電殛)危險?
l) Do employees working with electricity have adequate qualification?
l) 工作涉及電力的雇員是否有足夠資格?
共有條評論 網友評論